MiniPro Voltage/Current Sensor Off Road Stand Bar graph discharge display

Bar graph discharge display

recommend to use RX24 100W resistors with fans and heatsinks to cool them down):

Reverse polarity identification

This product is not compatible with 1/10 540 sized motors

MiniPro Voltage/Current Sensor Off Road Stand Bar graph discharge displayThis is a redesign of the MiniPro 200A Current Voltage sensor. This sensor runs off a separate power supply than the power source you are using for the MiniPro. Operates off of 7. 5 15VDC, you will need to supply your own power leads. Solder the positive lead to the VIN+ and the ground to the VIN . Run the sensor in series with your power source for your motor to get the current and voltage information. Calibration of the sensor is done in the MiniPro