Guide Sleeve - Without Cleat - With Lip - 3.9 mm x 5 mm Drills 0 mm x 30 mm

0 mm x 30 mm L

035” Hex Driver is used to tighten and loosen the Stylus Set Screw against one of the four flat sides of the Guide Post

leaving the adjacent proximal surfaces very difficult to clean with a traditional brush

Bending Plate Protractor

Guide Sleeve - Without Cleat - With Lip - 3.9 mm x 5 mm Drills 0 mm x 30 mmThe 3. 9 mm Guide Sleeve Without Cleat With Lip is for use with printed guides only. Sleeves are designed with a lip which secures the stereolithographic printed Guide Sleeve so it will not slip through the printed guide hole. Dimensions: ID 3. 9 mm x OD 5 mm x 5. 07 mm L OD 6. 2 mm lip x . 05 mm lip thickness Pair with: 3. 9 mm Depth Stop Drill Set