Timing Belt GT2 Profile - 2mm pitch - 6mm wide (1164mm long) [Discontinued] _RaspberryPi apply 5V to the red

apply 5V to the red (positive) and black (negative) wires and one side will get cold while the other side gets hot

Analogue Channels 5-8 = I2C Address: 0x6F

Put on your sunglasses before wiring up this LED matrix - 64 eye-blistering RGB LEDs adorn the NeoMatrix for a blast of configurable colour

Two Sets of PCB mounting holes

Timing Belt GT2 Profile - 2mm pitch - 6mm wide (1164mm long) [Discontinued] _RaspberryPi apply 5V to the redTiming belts are a fantastic way to transfer rotational motion (from a stepper motor) into linear motion (along a rail) and these GT2 belts are excellent for the task. They have a special profile with rounded teeth which reduces backlash. Often used for precision 3D printers and CNC machines. This belt is 1164mm long (582 teeth on a 2mm tooth pitch) and is 6mm wide. It comes in a loop but you can of course cut it down if you need a shorter length. A